Orders placed before 3:00 PM will be shipped the same day (excluding holidays).

1/5

OuterU FACEGLOVE HIGHLOFT

OuterU

OuterU FACEGLOVE HIGHLOFT

¥5,390 JPY

ColorBlack

Size S M L

会員登録でポイント獲得

In stock

🚚 即日発送

Regarding delivery

Returns and Exchanges

The standard for ski patrol officers and guides on Everest, Denali, and Antarctica

faceGlove® is a premium model made from POLARTEC high-loft material and custom molded to protect the most sensitive areas of your face without restricting breathing.

Combine with stretch tubing from Bala or Buff to create a smarter face protection system that keeps your goggles fogging up and keeps you focused.

It also comes with a head strap and ear loops, so you can choose whichever fits best for you.

*Included accessory ① Head strap: Use in place of the ear loop.
*Included ② Elastic cord (approximately 1m): This is a multi-purpose cord that can be used as a replacement string or for hanging around the neck. When using it as a neck strap, insert it into the ear loop hole from the front of the device and tie it to the ear loop string on the inside. Adjust the length to your liking.

ADVANTAGE

① faceGlove®'s unique shape does not restrict breathing and prevents fogging of goggles.
② Heat moldable to fit your face perfectly. *faceGlove®FLEX cannot be heat molded.
③ Provides targeted protection to the nose, the most sensitive area of the face.

Size details

SIZE CHART

Download the OuterU faceGlove size guide sheet and print it out at 100% (actual size) on A4 paper.

	height	body weight	helmet
S	152-160 cm	45-58 kg	S
M	160-182 cm	58-95 kg	M.L.
L	182 cm or more	95 kg or more	L/XL or above

*Height, weight, and helmet size are for reference only.

Plastic surgery method

MOLD MYSELF

Before warming up your FaceGlove, please read the following:
* Immediately after heating, hold the ear loops, not the FaceGlove itself. Holding the body may cause molding failure.

What you will need: FaceGlove, goggles, helmet, 2 coffee mugs, timer, mirror.

1. Thoroughly wet the fleece lining of the molded part inside the main body (the hard part at the bottom of the main body). Wipe off any excess water.

2. Roll the dough into a ball, place it in a mug, and cover the mug with plastic wrap. Make 2-3 holes in the plastic wrap.

3. Heat at 500W for 35 seconds.

4. Remove the FaceGlove from the mug, being careful not to burn yourself, and ensure the molded parts are sufficiently soft.
*If it is hard, wet it again and heat it for 30 seconds. Repeat this process until it becomes soft.

5. Put on the FaceGlove and adjust it so that it is centered on your face while looking in the mirror.

6. Put on your helmet and goggles slowly and carefully, making sure the FaceGlove is not in place.

7. Use your thumbs to bring the FaceGlove closer to your nose, and adjust it so that it is not too tight. Ideally, there should be a trapezoidal gap around your nose.

8. Wait 1 minute 30 seconds.

9. Carefully remove the molded parts, making sure they have hardened. To avoid mistakes, remove them without touching the nose part.

10. Gently fold the FaceGlove in half and place it between the mugs to maintain its shape. Let it sit for 5 minutes.

If it fails, repeat steps 3-10.

*The fabric of the product stretches up to the top of the nose so that it can be worn with sunglasses. However, if you plan to only wear goggles, you can cut the fabric if it gets in the way.
*Please be careful not to get burned when molding. outerU and its distributors will not be held responsible for any burns.