IF YOU HAVE Shoulder Bottle Pocket

This bottle pocket can be attached to the shoulder strap of the hug. As shown in the photo, it is just the right size to fit a Specialized Purist 22oz bottle. This bottle is slightly thicker than a 500ml PET bottle, so it fits in without any problems.

From 2025, the width of the base plate will be narrowed by 6mm.

In the 2024 update, the shoulder harness of the hug has become a little thinner,
The width of the base plate has been narrowed by 6mm.
It no longer protrudes from the shoulder harness, and the plate no longer touches the arms or chest.

The pocket pattern has also been changed to match the change to the base plate.
The pockets have been made slightly wider to make it easier to fit thicker bottles. The height remains the same.
The width is now compatible with Everyday and Whiteday shoulder harnesses, making it the perfect design for all ifyouhave backpacks.

It's very convenient to be able to take out the bottle with one hand!

Pulling the tape loosens the shock cord (round rubber) and opens the
Pull the plastic part to close [CLOSE]

The case fits perfectly inside the iPhone 16 Pro, and if you tighten it tightly, it won't fall out even when you run.

Size and fixing method

There are many add-on bottle pockets available, but they are not securely attached and tend to dangle loosely.
To solve this problem, we put a hard resin plate on the back and firmly fasten it to the shoulder with two hard rubber plates and nylon tape on the top and bottom to prevent it from shaking. Since the primary goal is to prevent it from shaking, we did not seek versatility so that it can be attached to backpacks from other manufacturers, but rather the top priority was given to the attachment method being able to attach firmly to the hug.

1. Remove the tape and shock cord (round elastic) from the ladder lock on the shoulder harness.
2. Pass the shoulder harness through the two rubber strips

3. View from the back of the shoulder strap after it has been passed through the rubber plate.
4. Finally, pass the tape on the two upper and lower snaps through the top and bottom rows of the shoulder harness tape and secure it with the snaps to complete the installation.

It is firmly attached to the shoulder harness with a rubber plate, and snap fastening tape on the top and bottom prevents it from shaking up and down, so you won't have to worry about it shaking.